Horned Punisher Helm

This is a bundle of patterns to make a horned version of the Punisher Helm

They are in PDF format and should be printed with 8 1/2 X 11 printer paper at 100% size.

Written instructions are included with the pattern files, but you will require the following...
Approximately five or six square feet of veg tanned 10-12oz leather
Stitching needles & thread
Finishing and edging tools, dye, paints, etc
Stitching chisels or hole punch in multiple sizes
Swivel knife and bevellers if tooling is desired
Slicker for wet-molding
Box knife or round knife for cutting
Power drill or similar tool

The helmet pattern dimensions are set up to work with 10-12oz leather and the horn pattern is set up to work with 5-10oz. Thicker or thinner leather may require a minor adjustment to the helm will fit a head size up to 24 inches in circumference. To go larger...print it out at greater than 100%

This is not a beginner pattern and involves wet-molding, hand stitching, and some degree of problem solving depending on the leather you use. If you do not know what you are doing...this is not the pattern to start with.

Legal Blurb: Once purchased, this is your pattern to use for personal or business purposes. The only thing i ask is that you not resell the pattern its self.